Heat Stress Risk Assessment VR Training for Qatar Supervisors (Decision No. 17 of 2021)
VR scenario for Qatar supervisors on the company heat stress risk assessment required by Decision No. 17 of 2021: tasks, exposure, controls and review.
QUICK ANSWER
Qatar Decision No. 17 of 2021 requires companies to prepare heat stress risk assessments and to provide annual health checks for workers. A risk assessment only works if supervisors know how to apply it on the day. A VR scenario walks supervisors through using the assessment on a real task.
What the Rule Requires
Qatar Ministerial Decision No. 17 of 2021 on heat stress: the decision requires companies to prepare heat stress risk assessments, to give workers annual health checks and to stop work when the WBGT goes above 32.1 degrees Celsius. Labour inspectors advise and enforce the rules, and guidance for employers and multilingual materials for workers are available.
The scenario is a supervisor on a utility tunnel shaft in Al Wakrah. The heat assessment lists controls for surface work but not for the bottom of the shaft, where there is no wind and a generator adds heat.
Hazards in This Scenario
- Tasks missing from the assessment
- Hot spots like shafts and enclosed areas
- Controls not applied on the day
- No review after a heat case
The Procedure the Scenario Rehearses
- Check the task is covered by the assessment
- Identify extra heat sources and no-wind areas
- Apply the listed controls
- Raise the gap for review
- Take WBGT readings where the work is
- Review the assessment after any heat case
Mistakes the Scenario Is Built to Catch
- Assuming surface controls cover the shaft
- Ignoring the generator heat
- Not raising the gap
- Never reviewing the assessment
Competence Assessment Matrix
| Decision point | What the assessor sees | Pass standard |
|---|---|---|
| Coverage | Shaft task | Gap found and raised |
| Heat sources | Generator | Identified as extra heat |
| Controls | Applied | Rest, water and rotation used |
| Review | After a case | Assessment updated |
What VR Covers
- Hot spots shown visually
- Gaps in the assessment placed in the scene
- Supervisor decisions scored
- Same standard across sites
What VR Does Not Replace
- The written risk assessment by competent people
- WBGT measurement on site
- Medical checks
Scope of a One-Scenario Pilot
A pilot builds this scenario as a single module, in Unity or Unreal Engine depending on the visual fidelity the task needs and the headsets on site. It runs on standalone headsets, logs every learner decision, and exports a per-person record for your training file. It is measured against your current method with a test cohort before anything is scaled.
Frequently Asked Questions
Does Qatar require a heat stress risk assessment?
Yes. Decision No. 17 of 2021 requires companies to prepare heat stress risk assessments.
Who enforces the heat rules in Qatar?
Labour inspectors of the Ministry of Labour advise employers and enforce the rules.
Does VR write the risk assessment?
No. Competent people write it. VR trains supervisors to apply it on the day.
Running this scenario across several sites or contractors?
We review your current procedure and tell you which parts can be rehearsed in VR and which still need hands-on practice.
Plan a Multi-Site PilotFurther reading
- Heat Stress VR Training for Qatar Sites: The WBGT 32.1 Stop Rule and Summer Hours (Decision No. 17 of 2021)
- Work at Height VR Training for Qatar Tower Construction (Labour Law No. 14 of 2004)
- Multilingual Worker Induction in VR for Qatar Contractors
- Work at Height VR Training for Doha Construction Crews
- Construction safety training programs
- Heat illness prevention
- All VR training scenarios: Qatar
- VR pilot readiness checklist
- How VR training programs are priced